Agilent Updating the E5810 firmware Updating the E5810B firmware - Upgrade Procedure c20140204 [14] free download

File name Updating_the_E5810_firmware Updating the E5810B firmware - Upgrade Procedure c20140204 [14].pdf

Updating the E5810B firmware Updating the E5810B firmware Do not update your E5810B firmware unless you have a specific need to do NOTE so, such as defect repair or instrument enhancements. If the firmware update fails, the E5810B will revert to its original firmware version. The E5810B uses a standard File Transfer Protocol (FTP) or via a connected USB drive to perform updates. The E5810B acts as an FTP client and searches for an FTP server that contains the E5810B firmware image. Agilent maintains a publicly accessible FTP server that contains the latest E5810B firmware at: ftp.agilent.com Login: anonymous Password: The latest E5810B firmware is located at /pub/e5810/e5810b/e5810_B_latest_firmware.hex. Prior versions are also available in this FTP directory. If you cannot access the Agilent FTP server from your E5810B, you can use any standard FTP server that is available, provided you have an image of the firmware. The requirements are an FTP server, an image of the E5810B firmware, and a LAN connection between the E5810B and the FTP server. The procedure to update the E5810B firmware depends on whether or not the Agilent FTP site is accessible from the E5810B or how your network is configured. The E5810B FTP client used to upload new firmware is a standard FTP client and currently does not support proxies. This means that anyone behind a firewall will most likely not be able to directly access the Agilent FTP site. Updating the E5810B firmware 1 Updating the E5810B firmware Updating the E5810B firmware via a connected USB drive Updating the E5810B firmware via a connected USB drive 1 Acquire an image of the E5810B firmware. Obtain the image from your Web browser. You may need to set up an FTP proxy on your Web browser. i On your Web browser, type ftp://ftp.agilent.com/pub/e5810/e5810b/